Skip to Content

Government & Agency Sales

Government & Agency Sales

Government & Agency Sales

A precision CNC machining center NEXUS Defense & Machine Co workshop in holland Pa producing firearm components
holland pennsyvania

precision engineered. purpose built.

Suppressors, rifles, and precision machining built for reliability and hard use.

Custom AR-15 rifle build by Nexus Defense & Machine Co with optic and rail system

AR-15 rifle setup on workbench at Nexus Defense & Machine Co during assembly and inspection

Gunsmithing and Firearm Machining Service Pricing

Nexus Defense & Machine Co. provides precision gunsmithing, firearm machining and custom fabrication services from our shop in Holland, Pennsylvania.

The prices listed below are starting prices for standard work on clean, serviceable firearms and components. Final pricing may vary depending on firearm condition, required disassembly, previous modifications, parts compatibility, setup requirements and the overall complexity of the project.

A final estimate will be provided after the firearm or component has been evaluated. We will contact you for approval before performing additional work that would materially increase the original estimate.

Barrel Threading and Muzzle Services

Barrel Threading —
Starting at $100

Specialty Barrel Threading
Starting at $125

Includes specialty thread specifications. Final pricing depends on barrel configuration and required setup.

Cut and Crown
Starting at $175

Includes shortening the barrel to the agreed length and machining a new crown.

Barrel Recrowning
Starting at $75

For damaged, uneven or poorly machined muzzle crowns that can be corrected without shortening the barrel significantly.

Muzzle-Device Installation and Timing
Starting at $75

Installation and proper timing of brakes, compensators, flash hiders and suppressor-mount muzzle devices.

Muzzle-Device Removal
Starting at $40

Pricing may increase for damaged, seized, permanently attached or improperly installed muzzle devices.

Pin-and-Weld Installation
Starting at $80

Permanent attachment of an appropriate muzzle device to meet the required barrel length.

Existing Pin-and-Weld Removal
Starting at $50

Removal pricing depends on the location, depth and quality of the original installation. Damage caused by a previous installation may require additional work.

Suppressor Alignment Check
Starting at $35

Inspection of suppressor alignment using the appropriate alignment rod and mounting configuration.

Firearm Engraving

NFA Maker Engraving
Starting at $50

Engraving of required maker information on customer-supplied firearms or components. The customer is responsible for providing the exact approved information to be engraved.

Serial Numbers and Manufacturing Markings
Starting at $50

Pricing depends on marking depth, location, material, setup requirements and the amount of information being engraved.

Custom Text, Logos and Graphics
Quoted by project

Custom engraving is priced according to artwork preparation, engraving size, material, depth and complexity.

AR Platform Services

AR Upper Assembly
Quoted by project

Pricing depends on the parts supplied, barrel installation, gas-system setup, muzzle-device installation and any required fitting or troubleshooting.

AR Lower Assembly
Quoted by project

Includes installation of customer-supplied components. Additional fitting or correction of out-of-specification parts may increase the final cost.

Complete AR Builds
Quoted by project

Complete builds are priced according to the selected components, configuration and required machining or fitting.

AR Troubleshooting and Repair
Starting at $85 per hour

For cycling problems, gas-system issues, feeding and extraction problems, improperly assembled firearms and other functional concerns.

AK Platform Services

AK Assembly, Conversion and Build Work
Quoted by project

AK work varies considerably depending on the receiver, parts kit, trunnions, barrel, rivet work, previous modifications and overall condition of the components.

AK Troubleshooting and Repair
Starting at $85 per hour

Includes evaluation and correction of assembly, alignment, feeding, extraction and function-related issues.

AK Barrel and Trunnion Work
Quoted by project

Final pricing depends on the amount of pressing, drilling, pin fitting, headspacing and corrective machining required.

NFA and Specialty Firearm Work

SBR and NFA Configuration Work
Quoted by project

Includes firearm configuration, component installation and related machining. The customer is responsible for obtaining all required approvals before regulated work is performed.

Suppressor-Host Preparation
Quoted by project

May include barrel threading, muzzle-device installation, shoulder evaluation, alignment inspection and other work required to prepare a suitable suppressor host.

Specialty Firearm Modifications
Quoted by project

Projects involving uncommon platforms, extensive disassembly, one-off fixtures or custom tooling require evaluation before pricing can be established.

Gunsmithing, Machining and Fabrication

General Gunsmithing Labor
Starting at $115 per hour

Applies to repair, troubleshooting, fitting, assembly, modification and other work not covered by a listed flat-rate service.

Custom Firearm Machining
Starting at $125 per hour

Machining time, programming, fixture design, setup and tooling requirements are evaluated separately for each project.

Custom Tooling and Fixture Fabrication
Quoted by project

For projects requiring specialized holding fixtures, press tooling, alignment tools or one-off fabrication.

Parts Fitting and Installation
Quoted by project

Pricing depends on the firearm, component, required fitting and the condition of the customer-supplied parts.

Pricing Information

Starting prices assume a standard setup and a firearm or component that is clean, complete and in serviceable condition.

Additional charges may apply for:

Extensive disassembly or reassembly
Damaged, seized or improperly installed components
Previously modified firearms
Out-of-specification customer-supplied parts
Custom fixtures, tooling or programming
Rust, corrosion, heavy fouling or damaged fasteners
Test firing, ammunition or function testing
Expedited work when available

Parts, refinishing, coatings, shipping, ammunition, taxes and transfer fees are not included unless specifically stated in the estimate.

Customer-supplied parts are subject to inspection and compatibility verification. Nexus Defense & Machine Co. cannot guarantee the quality, fit or performance of parts manufactured by another company.

A minimum shop charge may apply to small jobs, inspection work and projects requiring significant administrative or setup time.

Estimates and Project Approval

Some projects can be estimated from clear photographs and a detailed description. Others require an in-person inspection before an accurate price can be provided.

Once the work has been evaluated, you will receive an estimate describing the expected services and costs. We will obtain your approval before performing additional work that would materially exceed the estimate.

Start Your Project

Contact Nexus Defense & Machine Co. with a description of the firearm, the work you would like completed and any relevant parts or specifications.

Clear photographs are helpful when requesting an initial estimate.

All firearm work is accepted by appointment.

‍ ‍Nexus Defense & Machine Co

SAM.gov Registered

CAGE: 1ZSQ6 | UEI: M7E5K6RN4SR1

Contact

‍ ‍General: info@nexusdefenseco.com‍

Agency Sales: agencysales@nexusdefenseco.com ‍
‍ ‍Phone: (267) 291-4534

FFL 07 Manufacturer / SOT 02

© 2026 Nexus Defense & Machine Co.

All Rights Reserved

‍ ‍HOLLAND, PA